Electron Microscope Specimen Mounts and Holders
Electron Microscopy Sciences Calibration Standard Model 70-1D with Cert Choose Mount
A precision pattern providing accurate calibration in the horizontal plane for very high resolution, nanometer-scale measurements. Period: 70 nm pitch, one-dimensional array. Accurate to +/- 0.25 nm. Refer to calibration certificate for actual pitch. Surface: Silicon Oxide ridges on Silicon, 4x3 mm die. Ridge height (about 35 nm) and width (about 35 nm) are not calibrated. Model 70-1D with Certificate. Choice of mount.
Electron Microscopy Sciences Dual Micrometer Calibration Slide PS52N with UKAS
Dual imperial/metric scales calibration slide. 50 mm in 0.1 mm divisions and 2" in 0.005" divisions. In wooden case. Ideal for calibrating optical products with a large field of view, such as stereo microscopes or imaging systems. Negative pattern formed in low reflective chrome for incident light applications. 76 mm x 25 mm.
Electron Microscopy Sciences PS 150 XO Calibration Slide
All of the PS-XO series of Calibration Slides are made with Green Float Glass and have a bright Chrome Image High definition 150mm scale in 0.1mm divisions with extended 0.5mm, 1.0mm and 5.0mm lines. Series of dots and crosses, at 10mm intervals.
Electron Microscopy Sciences PS 100 XO Calibration Slide
All of the PS-XO series of Calibration Slides are made with Green Float Glass and have a bright Chrome Image High definition 100mm scale in 0.1mm divisions with extended 0.5mm, 1.0mm and 5.0mm lines. Series of dots and crosses, at 10mm intervals.
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1" surface, 13/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Height: 13/16"
Electron Microscopy Sciences Variable Tilt Mount holder For Pin, 3.2 mm x 8mm Pin
This mount which is made from aluminum is used for the mounting and tilting of samples from 0 – 90 degrees as well as for SEM investigation with small working distances. The mount is marked for 30, 45, 70 and 90 degress. The table measures 11 x 11 mm (0.46" x0.46")and the overall size is 14 x 14 x12.7 mm
Type: 3.2 mm x 8mm Pin
Electron Microscopy Sciences Large Set Screw Vise, Ø25 mm, 3.2 mm x 8mm Pin
This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 10 mm (.394") wide x 5 mm (.197") deep. It measures 25 mm (1”) dia. x 17.5 mm (0.69”) high.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 2" surface, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 2"
Height: 1/4"
Electron Microscopy Sciences Circlips Insertion Tool
Circlips are for all EMS TEM sample holders and specimen rods. They are made from heat treated Beryllium copper. The Circlip extraction tool is for removing our Circlips from all TEM sample holders.
Electron Microscopy Sciences Fixation Clips Specimen Mounting Supports, 6 mm dia
The fixation clips 6 mm in diameter provide support spring for small and thin specimens during mounting.
Electron Microscopy Sciences Clip SEM Pin Mount, 25 mm, 3 clips
Specially designed for easy, quick and clean mounting of any type of thin specimen on specimen stubs. These spring-loaded clips accommodate samples of up to 2 mm thickness. Samples are held securely by small spring-loaded clips and allow for easy change of samples. Adhesives are not required, eliminating possible outgassing issues and saving time. Ideal for holding silicon chips, paper, wire, threads, thin films, sheet metal, etc.
Diameter: 25 mm
Includes: 3 clips
Electron Microscopy Sciences Double Slot Set Screw Vise, 15 mm
SEM specimen holder with two 1 mm by 3 mm deep slots. Clamp thin specimens and cross sections without conductive paint or tape. 3.2 mm pin. Machined aluminum with 2 stainless steel allen set screws. Includes allen wrench.
Electron Microscopy Sciences SEM Clip M4 Cylinder Mount, 1 clip, 50 mm, 6 mm Pin height
These spring-loaded clips accommodate samples of up to 2 mm thickness. Samples are held securely by small spring-loaded clips and allow for easy change of samples. Adhesives are not required, eliminating possible outgassing issues and saving time. Available with single and multiple clips and are ideal for holding silicon chips, paper, wire, threads, thin films, sheet metal and more. SEM Clip Mounts with multiple clips can hold larger samples or multiple smaller samples.
Includes: 1 clip
Diameter: 50 mm
Pin height: 6 mm
Electron Microscopy Sciences SEM Clip M4 Cylinder Mount, 8 clips, 50 mm, 6 mm Pin height
These spring-loaded clips accommodate samples of up to 2 mm thickness. Samples are held securely by small spring-loaded clips and allow for easy change of samples. Adhesives are not required, eliminating possible outgassing issues and saving time. Available with single and multiple clips and are ideal for holding silicon chips, paper, wire, threads, thin films, sheet metal and more. SEM Clip Mounts with multiple clips can hold larger samples or multiple smaller samples.
Includes: 8 clips
Diameter: 50 mm
Pin height: 6 mm
Electron Microscopy Sciences SEM Clip M4 Cylinder Mount, 1 clip, 32 mm, 10 mm Pin height
These spring-loaded clips accommodate samples of up to 2 mm thickness. Samples are held securely by small spring-loaded clips and allow for easy change of samples. Adhesives are not required, eliminating possible outgassing issues and saving time. Available with single and multiple clips and are ideal for holding silicon chips, paper, wire, threads, thin films, sheet metal and more. SEM Clip Mounts with multiple clips can hold larger samples or multiple smaller samples.
Includes: 1 clip
Diameter: 32 mm
Pin height: 10 mm